For Your Own Peace of Mind - Organize!

 

As my previous post said I'm packing to move. The deadline is fast approaching and of course I'm scrambling now since before this I had 'plenty of time'. I no longer have 'plenty of time'.

I'm going to use this post as a heartfelt plea for you to go through your hobby/office spaces. Please declutter and throw out/donate/sell what you're not going to use. Look, actually look, at what you have and be brutally practical. Take what's left and put it into storage containers, then put those on shelves. It's a lot of work and it may not seem necessary if you're in your forever home or don't plan on moving.

But sometimes you don't get the luxury of planning on moving. Sometimes your forever home turns out not to be your forever home. And in general we collect and pile up a lot of crap.

I was somewhat lucky in that I started organizing things into plastic storage bins a while ago but never really finished. I'm paying for that now in some respects and in others not so much. I can use a lot of the 'unorganized' things and use them to fill space where the containers don't fit the boxes. That helps greatly in the short term, it isn't so great in the long term.

I'm not saying you can't keep things 'just in case'. I've got a lot of things like that for scratch building and they pack up just fine. When they're unpacked they're going into, you guessed it, plastic storage bins. I've also found a lot of things that I kept because it was more convenient than throwing them out. That's no longer the case. I don't need them and see no use for them in the near to moderate future. So they go.

When you're in one place for a long time this happens. It's easier to leave things out because you're using them than it is to go through and put them away. Piles occur. There's no judgement here. There can't be based on my own situation. But I'm saying that organization will save you a lot in the long run.

I'm a big fan of plastic bins over cardboard when possible. Get ones with tops. I use a lot of the dollar store ($1.25 store?) plastic shoeboxes and their smaller containers with handy flap lids. Those two sizes are mostly what I use since I can't make them too heavy for metal miniatures and the supplies fit mostly very well into the smaller ones. I'm also a huge fan of the 16 x 16 scrapbook paper holders from the craft store since they hold mini paint bottles well. I have a cart that holds six of those. I'm going to need another cart. But when I put the paint away it's put away.

In general it's a lot easier to find stuff if you've put like with like. All the sandpaper? In a plastic paper holder with a sliding lock. All the Dremel accessories? In a container. All the bases? In a container. It's work up front but if you look at it, really look at it, it's a one time pain. Then it saves you time when you're looking for where you put whatever later.

I also have storage cubes with doors. I lucked out getting those because they were discontinued. They fit perfectly into my current space and should fit well into my new space with some planning. Right now they're handy to where I paint so I can keep things I use a lot in there. In plastic storage bins or loose-ish in other kinds of containers. I use a pill bottle and a pilsner glass for the second rate and terrain paint brushes. They're contained.

I'd have a lot more trouble if I hadn't done this up front. Even with doing a partial organization it's saved me a lot of time and things are already together. When a box has 'bases' written on it I know all the bases are in there when it comes time to unpack. When a box has 'air' written on it I know it's everything I need for the air compressor. There will be other things in those boxes but I know what the important things are.

Another thing I found from all this is just how much I have of particular kinds of items. Between you and me I have too many of some. I know I can clear one of those when I get settled. The other will take more work and planning. But until it was all gathered up I didn't know the extent of what I had. Having it scattered put it out of mind. Having it put in one place lost me that luxury.

So just how well organized will the new space be? I'd like to think it's going to be decently organized. What's not in plastic containers will get there. The things that can be reduced will be. I will have more storage space so more things will be visible for me to use. I'll even label the containers if I get all kinds of ambitious. Those are all future considerations. Right now it's a matter of a rough organization of at least getting things into the boxes that will go into the same room.

I'm lucky in that I'll have more rooms for things now. With my hobbies I outgrew my two bedroom apartment resulting in a dense accumulation that was difficult to use. I worked hard to use every possible bit of storage space and I think I did well. The problem with that was getting to most things. I also had things on the shelves that I wasn't going to use but had the space to put them. That happens. That's going to happen again. By having more rooms and separating two big space hogging hobbies I'll have actual room to work. That's a luxury I haven't had for well over a decade.

I'll end this as I started, begging you to take the time to organize what you have. Plastic works better than cardboard in my opinion because if something bad happens that involves water your stuff has a much better chance of coming through undamaged or at least minimally damaged. Wipe it off and put it back. Cardboard, not so much. There's enough variety of sizes and shapes of plastic containers that you can find what you need or at least what will work well enough. You don't have to do it all at once. But please, please, please do it.

ReaperCon 2019 Review

I already posted a summary update on Twitter but there's only so much you can do with a series of 140 character posts.

These are my own experiences and thoughts about the convention. I've been attending since the artist convention in 2005, missing only 2012 (I needed a break for reasons). So I remember the days when it was at the factory, missed the first move to a hotel, then have been there through the remaining venue changes.

I've also got the comparison between pre-Bones and post-Bones conventions. I'll be making reference to that in my review. There will be more on that following the review.

Day 0 - Wednesday

Travel wasn't so bad. It started out not so great when I got the text that my flight was going to be delayed for an hour, then another text that it wasn't delayed, and then an unannounced gate change. The gate change was a bit of a scare since I'm using the wheelchair service at the airports so they had to push me and another person to the new gate in a hurry. But we made it.

I did have to use two pieces of luggage for the trip down due to bulky/heavy things. I had expected to need the second bag so I had the soft duffel from my GenCon trip ready. The suitcase was three pounds overweight but a quick switch of one item to the other bag fixed that easily. My airline 'gives' you two checked bags without an additional fee, which was part of why I selected that one.

I was the wheels for four other people going to the convention with about an hour's spread between our flights. Eventually we all gathered up and went to the rental car area. I'm a rewards club member and get to skip the rental desk, choosing whatever car I want from the designated aisle. I was a bit concerned about fitting five gamers and our luggage into a sedan but funny enough the only vehicle in the area was a minivan so I got to take it with no upcharge. Fate was smiling on us.

The hotel was the same as last year, if slightly more 'into' the convention now that they had a feel for what we were. Custom room keys (probably paid for by the company), colored lighting, etc. We got our room block goodie bags and dropped our things. Then a quick Walmart run for supplies and we were all set.

The check-in line was long and moved slow, which is about normal. They were having printer problems for tickets, which is about normal. But I got my badge, my class tickets, and a BUNCH of swag bags since two people had me purchase additional ones for them. All that got dumped in the room.

There's a Meet and Greet pizza dinner included in the VIP badge. They didn't get better pizza this year. It's pretty bad pizza. I resort to eating the toppings and leaving the crust behind. It makes for an interesting plate when I'm done and the servers never know whether or not to take it.

After that there's no real scheduled events so everyone breaks off into groups. I hit my room to rest.

Day 1 - Thursday

Hotel stay includes breakfast and this place is nice for having real food on it. I won't repeat this for each day but breakfast consisted of lots of scrambled eggs, a nice amount of bacon, fruit, and milk. Carbs are cheap and easy to get, protein not so much.

I set aside the entire day for shopping. Here's where ReaperCon shines for me. They have an area where all the cast parts are kept before they're packaged. Given the name of the company the area is called The Boneyard. ReaperCon is the only time of the year you can trade in old metal and get new metal ounce-for-ounce. Which means you can get figures for far less, relatively speaking, than buying them retail.

I do a lot of shopping. And I was shopping for three other people so that's even more shopping.

This year I remembered to bring a lot of plastic baggies so I could keep large multipart models together (it's a right pain to sort all that out) as well as keep things organized as I went. It helps with shopping for other people as well.

It's in Texas and there's no air conditioning in that area. It's a concrete floors with shelves six feet high. The minis are kept in those heavy yellow plastic bins so it's a day of standing, bending, stretching, reaching, and generally more exertion than I do at once. This is why I set aside the full day.

Whatever they didn't have on hand they'll cast so once I put my passengers to work on shopping for other people while I finished mine (long list this year) we filled out the casting slips and left. I would have stayed longer but one person had a class that afternoon and I didn't know that when I agreed to be his ride.

I don't like time limits on my shopping.

That night was me being tired so it was a drink at the complementary cocktail hour then a break until cheap appetizers at the attached restaurant. I was also told to try the tomato soup because it came with deep fried cheese fritters. The soup was all right, the seared tuna was overpowered by the relish, the chicken and avocado egg rolls were the best of the bunch. I ate too much.

Day 2 - Friday

I had one class on Friday. I try to take three classes per year, just to keep learning. It gets difficult at times given that I've been taking classes for so long and there's a lot that doesn't interest me. It doesn't help that there are instructors on my 'do not take classes from this person' list either. But I can generally find some classes.

The class I chose wasn't very good for me. The instructor focused on two things that I pretty much already knew how to do and didn't show any different ways for me to try. That and they both depended on dry layers and that doesn't happen quickly in Texas. So instead of nice clean lines we ended up with smeared messes. Which the instructor then tried to give suggestions on how to improve. He stopped looking at mine when I said I could have done it if the paint had time to dry.

I'm not sure if that instructor went on The List or not. I'm leaning towards it.

The rest of the day was me going through the vendors. You get a punch card in your swag bag and if you get it punched by all the vendors you get a free mini. It's a nice way to get you to visit all the booths. I like to shop, chat, and then ask for the card to be punched. I'm in the minority. This was a shopping day anyway, not a buying day.

The selection of vendors is eclectic. One big problem is that the convention is held over a holiday weekend and some of the more desired vendors won't bother. Another big problem is that a huge convention is happening at the same time so if they have to choose one it won't be this one. The last big problem is that the convention isn't that big and it's manufacturer sponsored. Until last year they only had to deal with the last problem. The other two are making themselves known.

After wandering the vendors (missing two because they hadn't arrived yet) I spent time catching up with artists and other people I knew.

I took the factory tour because I like to take the tour. I like to see what's changed, have some pleasant memories of what it used to be like, hear the history, etc. I can't do the upstairs part because of the stairs but I had a bit of shopping to do so I peeled off the tour early and did that. It's allowed. I met up near the end and still got to enjoy the last of the tour itself.

A couple of people I know were arriving this evening so I kept an eye out for them. I had brought stuff for them and I rarely get to watch people open presents. I was able to meet up with one of them, the other hadn't arrived.

Solo cocktail hour but free drinks are free drinks.

I made the mistake of ordering a pizza for dinner. It was a mistake because the tiny fridge in the room would in no way hold pizza leftovers even if I had a way to wrap them up. I really didn't think that one out. So I was back to eating pizza toppings and ignoring the crusts.

Day 3 - Saturday

Two classes today, separated out. I spent my day hanging out, going to a class, hanging out, going to a class, hanging out, etc. It's odd to have that break between classes because I didn't want to start anything with the short time I had. So it was kind of a wandering time.

The first class of the day was great. It was a demo on airbrush usage and I've taken classes from that instructor before. It's been agreed that this one is an inconsistent teacher - on point for some classes, not so much on others. This time there was an assistant of sorts to keep them on track and it helped a lot. I'll bring up my airbrush at the end after the review.

The second class of the day was me giving the instructor another chance. They didn't do well, in my opinion, teaching a class the previous year. But I liked the topic of this one and they had already taught it at GenCon so I hoped it would be better. My hopes were in vain. This one was another wasted class. And this teacher is on the 'do not take their classes' list going forward.

Cocktail hour again. The hotel had some special con-themed drinks so that was fun. I had the Dragon Tears blue thing and it was tasty. Actually I had two of them this time. I only had one the night before.

I socialized a bit and then had dinner at the attached restaurant. I just realized I had a coupon for that place I could have used, maybe, but oh well. Dinner was all right and far more than I'm used to eating.

The painting contest awards are held on Saturday evening and there's nothing of interest for me there. Everyone I know puts entries in the contest so I'm on my own during that time. I hung out in my room and read.

Day 4 - Sunday

I leave early on Sunday now because I have no interest in the auction and that's the big event of the convention after the painting contest. It's kind of bigger because there's free stuff. It's free because you can only bid using convention money you get from participating in convention events. There's nothing I want or need so there's no reason for me to stay.

Once again an unannounced gate change at the airport but that was the only hiccup in my travel. My suitcase was lighter than when I brought it because I left a lot of things there and had all my shopping shipped home. It was worth the cost.

Home

It seems like my cat suffers from separation anxiety. She's been a perfectly trained cat until this weekend when she did unspeakable things to the pet bed and my bathroom floor. According to the person watching her that happened on Saturday some time. So it was after I was gone for a few days and she was left alone more than I would like. They could only visit once per day during the week and I think it was more of a 'food-water-litter box' situation than spending time with the cat.

I think she's better because I spent Sunday and Monday making sure she could find me and get attention any time she wanted. I did have to unpack the suitcase and I've made sure she has no ability to do unspeakable things to it. I hadn't planned on going into the office this week so she'll have me around more than just that time. That plan was made to give my knees some time to recover.

Summary

I didn't do any of the fun painting stuff I had planned and I'm not exactly sure why I didn't. I walked by the area any number of times. There were open spaces. But for whatever reason I didn't sit down to paint the free minis. I'm going to have to think about that one.

I'm never quite sure why I keep going to this convention. I don't socialize much and every year there's fewer and fewer people I know. I take a few classes. I don't enter the painting competition. I think it's the shopping that keeps me going and habit. If I didn't go to this one I wouldn't go to anything. It's a sobering thought.

Bones

What the heck are Bones you may be asking? Until several years ago everything Reaper put out was in metal. Then they used Kickstarter to start their plastic injection molded line. They call those Bones. That was a turning point for the company and their customer base.

The Kickstarter got a lot of attention and a lot of people who had never been a part of the hobby dove in. The site forum exploded with new people and everything was Bones, Bones, Bones. Then there was the second Kickstarter. And the third, And the fourth. The fifth is starting in a month. Plastic is the thing for the bulk of the attendees. I'm a metal snob so I don't bother with the plastic stuff at all.

The vast majority of the convention attendees have never painted metal minis. They're all about the plastics. I don't really blame them. The cost difference is significant and most of the new stuff is in plastic. It's the old timers who have more affection for metal. And the competition painters but resin is good enough for that as well. Metal is becoming sidelined.

Airbrush

I almost forgot I was going to put in something about my airbrush.

I have four Badger airbrushes. I really only need one but anyone who knows me knows I go big when I go into something. One thing I did during a sale was buy replacement triggers for them that are taller so there's less hand strain when using the airbrushes. That means taking them apart and replacing triggers.

It wasn't bad to do that. It's always good to know how to disassemble and reassemble your tools.

Except for one of them. That one didn't slide like it should, didn't move like it should, and there were air bubbles around the cap. Fine. I set it aside and didn't think much about it. Then the convention started getting closer and I had two chances at having professionals look at the thing to find out what I did wrong and learn how not to do that again.

The owner of the company was there. He looked at it briefly and told me to send it to the factor for service.

The instructor for the class looked at it and said "Sure. I can take care of that." and started it soaking in a cup of isopropyl alcohol. He also showed me why part of it was sticking ("Just ram it back and forth a few times until it moves smoothly. It gets junked up with whatever they put on it at the factory."). Once he cleaned it out it was working perfectly. Turns out I did reassemble it correctly or when they were mucking around with it the piece went back into place.

The final thing was the kicker. The bubbles that were coming out around the cap? "Those just happen. Ignore them."

So the only thing truly 'wrong' with it was needing to have the factory lube worked off the needle due to the very tight tolerances of that model. Which means nothing was wrong with it.

I Airbrushed! (No Pictures)

I finally used my darn airbrush. I only used one and I used it to prime the minis for my dungeon crawl. I did this long after I should have done so.

I expected this to be good practice and it was. I learned that it's another tool that I need to learn to use better. Priming is great for practice because it doesn't matter what it looks like in the middle - it's going to be a solid coat at the end.

I'll be on my third photo tent enclosure when it arrives. I went from 60x60x60cm to 40x40x40cm to 30x30x30cm. I can't really go smaller than that. I didn't really measure the area well and I don't know what I'm going to do with the extra photo tents but I'll figure something out. Or not.

I did find that wearing a mask is A Good Idea. I also hope the fan I'm getting is powerful enough to pull the overspray into the filter. If not I may have to do some surgery on it to get a better fan in place. I'm hoping with practice there will be less of that but from what I read from my friends there's always paint flying about.

I'm debating about trying the airbrush on the minis for actual painting, even if just doing some base coats. I do need to learn but I also need to get these painted. It's a tossup. Plus I've got appointments after work pretty much all week so that limits my time overall.

The good news is that I used the airbrush, I understood how to use it, I realized that I'm going to need practice, I'm OK with needing practice, and that I cleaned it with a minimum of effort. All those are good because they're steps forward.

Which is why I'm tempted to use it for actual painting. But it's probably smarter to hold off and practice with ink and paper when I have more time. That means breaking out the brushes for the minis. Although those base coats are tempting me...

All Right Then

Airbrush

I have the compressor, the moisture trap/pressure regulator, the AIR HOSE, and all the air brushes where I can find them. The compressor et al is also set up where I think it's going to be when I'm using it.

The space for the booth has a piece of foamcore on it as a base for the photo tent/spray booth when it arrives. The turntable for inside the booth is sitting in a box but I can find it easily enough.

I haven't done any airbrushing because:

1 - It's been too freaking cold.
2 - Housework was needed.
3 - 3D printing.

That will change this week since the temperature is going up and the housework is getting done. About the 3D printing...

3D Printing

I was completely sick of printing grey and printing dungeon pieces. Printing grey dungeon pieces was excruciating. Therefore I took the holiday to print some stuff that wasn't grey and wasn't dungeon pieces.

I properly labeled all the test prints (low poly cats) with the brand and color of each one. I have the start of a filament cat army on the windowsill.

I also printed up useful stuff like a grip for painting miniatures, a clipper for filament (it has to be cut at an angle to be loaded), and a new case for the Raspberry Pi media server. I printed in colors! Pretty, pretty colors.

I also put up the last long shelf on the adjustable spacers and filled it with .. filament! That got the worst of it out of double rows under the printers. I also lowered the short shelf one notch so it fits all the types of boxes I have. That helps. A little.

3D Printer Repair

Absolutely nothing was done on this since the board is still in transit. It got to spend new year's eve in Germany but now it's on it's way here. It's still showing tomorrow as the delivery date but we'll see if that happens.

Since the order is a decent amount I need to sign for it. I certainly hope it shows up early because I was kind of planning on going to the post office and to the craft store after work. But if I'm waiting on the delivery that gets postponed.

Once the board is here I can restart the upgrade process and hopefully have it running by the weekend. That will be more grey dungeon pieces being printed but for a shorter period of time. Win some, lose some.

Convention

I'm still on the fence here. A big incentive for me is gone since there won't be a Chessex dice booth there. High cost and low profit were the owner's reasons for not showing up and those are perfectly valid. But I have a long shopping list and now I need to think about why I would go besides running my games.

BTW - the vendor list is currently almost empty. As in most of the spaces are showing as Available. If they haven't updated the website that's not a good sign. If that's true it's not a good sign.

My events are still showing as free even though it was supposed to be fixed a month ago. Their dashboard shows them at the correct price, the event ticket buying site shows them as free. I'm letting them work it out. Their systems are not my concern.

I'm giving it a few weeks to see how sales go. If it gets within a couple of weeks of the convention and there's very low or no ticket sales then I'm going to cancel. I know, I know. I committed to running the games. But if there's no one choosing to sign up then I won't be running games. I'll be sitting next to a table being bored. And having to pay for the privilege since I don't know if they reimburse for events that had no players. Actually I don't know their full badge reimbursement policy - commit to run the games or actually have enough players?

Housework

We're not going there.

Is the Airbrush Worth All This?

So I have not just one but four airbrushes. I've never used an airbrush. Um. Actually I have five but one of them is going to be sold when I get around to it. So I don't count it.

I got the airbrush bug mostly for priming stuff so I don't have to be dependent on the weather and deal with aerosol fumes. Then I started seeing all the very nice things they can do with practice and foresight. Therefore I thought airbrushes were good things.

I didn't take into account my limited space. I really didn't. But I'm working around that. Or working in it. Whatever the phrase I'm still moving forward.

I have all the minis to paint for the dungeon crawl. I kind of neglected to think about that while I focused on printing up the dungeon. Whoops. Since these are full adventuring parties I need sixteen minis painted. Plus the three NPCs. I got them at the convention and they've sat in the bag since I got them home.

I ordered new triggers for all the airbrushes to make them more comfortable to use. Over Christmas I replaced the triggers on all four of them. I'm rather proud of that. I also took the time to completely disassemble each one and put it back together so I had that under my belt. All of them have the quick connect adapters as well. It's now a pretty sweet setup. Final triumph is that they all fit into the plastic bin I had gotten for airbrush stuff.

Last week I spent the time to find them, double check I had the right ones, carefully placed them in their parties, cleaned them up, assembled them, based them, glued them to 'bottle caps', sand based them, and added the gesso to the sand bases to glue it all in place. Overall they're ready to go.

Then I pulled out the air compressor for the first time and it does sit nicely on the kitchen counter where I planned to put it. Check.

I attached the pressure regular and moisture trap. I may have to use thread tape on it but for now it's attached. Check.

I looked for the air hose I bought that's brand specific and has the matching quick connect adapter. Um. No. Can't find it. And the search begins...

I looked for literally hours last night with no joy. I gave up and sulked. I also thought about where I could have put the stupid thing. There was a brief time when I thought about ordering a new hose and adapter but stopped myself because I don't NEED another one and can't use another one. That and they're not cheap.

Today I didn't get to looking again until later in the evening and dug through a lot of stuff. Finally, tucked away in a canvas bag, I found the stupid thing. Once I found it I realized that it was in the carry bag from when I took a fairly useless airbrush class at a regional game store. The airbrush was put away, the hose wasn't.

Check! Air hose on the compressor. Again it may need thread tape and I'll deal with that if needed. I know where the thread tape is.

The final thing was the photo tent I got to use as booth. I do have a portable booth but that thing is large and a pain to set up. I don't need heavy filtration for acrylic. A note on that later. The photo tent is one that folds down like the car sunscreens do so it's perfect for my space.

Except that it's not. I didn't think to measure so it's far too large to fit into the space I've allocated for a spray booth. Sigh. I needed a YouTube video to show me how to fold it back up (twist it all into the center and squish) and then I measured the space, converted inches to centimeters, and ordered the correct size. I'll figure out a use for the larger one at some point.

By the time all this happened it was way too late to consider doing anything. It was too late when I found the air hose. However I could continue to get it set up and that's how I found out about the photo tent.

Tomorrow I will be using a cardboard box as my spray booth because I have a very large number of them sitting in my living room waiting for a new home. There has to be one in an appropriate size in there. It's not perfect but it's better than a piece of posterboard or something.

Had I not found the air hose tonight I was going to use aerosol primer on the minis because I couldn't wait any longer. Now I can use the airbrush and I may even try putting down skin base tones with it as well. Those are always the first layer of paint and if I overspray badly it won't matter. I need to learn to do this and the best way is to just do it.

Ok. Some notes here. The 'bottle caps' are actually 3D printed ones that are supposed to fit the painting handle I haven't printed yet. It's a knock off of the Citadel one and was designed to fit these caps. The good news is that I can print as many of the darn caps and handles as I want. If they work.

I do have some other ones that use bottle caps and are on spools but I like this one better. While most people only have one that's because theirs cost a lot of money. Mine just take some printer time and a little filament. Plus I can print all the caps I need.